Incubateur de table à température constante

PRODUITS

Incubateur de table à température constante

Description

  1. In the workroom the hot air is convective naturally and cyclically
  2. Digital display microcomputer intelligent PID temperature
  3. New anti-hot handle

Specifications

Cycle Mode Natural convection
Function Temp. Range RT+5-65℃
Temp. Resolution Ratio 0.1℃
Temp. Motion ±0.5℃
Temp. Uniformity ±2.0℃
Structure Inner Chamber Without.
Without E model: mirror stainless steel
With E model: High strength galvanized sheet
Outer Shell Cold rolling steel electrostatic spraying exterior
Insulation layer High quality rock wool board (with CE)
Heater Nickel chromium alloy heating wire
Power rating 0.18kW
Exhaust hole φ28mm top (with function of test hole)
Controller Temp. control mode Two temperature section intelligent PID
Temp. set mode Touch button setting
Temp. display mode Measuring temperature: display on the four digital tubes upper row.
Setting temperature: display on the lower row
Timer 0-9999min (with timing wait function)
Operation function Fixed temperature operation, timing function, auto stop
Additional function Sensor deviation correction, temperature overshoot self-tuning,
internal parameter locking, power-off parameter memory
Sensor PT100
Safety device Over temperature sound-light alarm
Specification Inner Chamber size (WxLxH)(mm) 260 x 260 x 260
Exterior size (WxLxH)(mm) 380 x 455 x 568
Packing size (WxLxH)(mm) 500 x 530 x 657
Volume 18L
Shelf number 6
Load per rack 15kg
Shelf space 29mm
(50/60Hz) Current rating AC220V/0.8A
NW/GW (kg) 27/35